Process Overview
This automation solution uses two DENSO robots—VM60B1 (6-axis vertical articulated robot) and HS055 (SCARA robot)—to automate raw material loading, turning-center machining of plastic parts, and a downstream press-fit (crimping) operation. By integrating material loading, machining support, and press-fit handling into a single automated workflow, the system minimizes control points while improving overall productivity.
Components
| Robot | DENSO VM-60B1 Repeatability: ±0.07 mm IP rating: IP40 Standard cycle time: 0.95 sec DENSO HS-055A1 (SCARA) Horizontal reach: 550 mm Repeatability: ±0.02 mm IP rating: IP6 |
|---|---|
| Peripherals | Hyundai WIA turning center KIT 4500 (optional / separate) Pneumatic press Raw material loading unit CNC machined-part transfer unit Machining chip/swarf discharge conveyor Finished-product outfeed conveyor |
Workflow
| STEP 1. | Load plastic workpieces into the turning center |
|---|---|
| STEP 2. | Take out the machined/cut parts and place them onto the transfer unit |
| STEP 3. | Pick the parts with the SCARA robot and load them into the press station |
| STEP 4. | Pick the press-finished parts and discharge them to the outfeed conveyor |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.
Recommended Use Cases
YASKAWA Industrial Robot Hanger-Box Palletizing Automation
Process Overview This deployment uses a YASKAWA GP180 to palletize boxes of hanger products weighing over 20 kg onto pallets. By replacing manual handling in heavy-payload work, it helps prevent musculoskeletal disorders and enables faster, more consistent palletizing performance. Note: Cost may vary depending on the installation environment, robot brand, and payload requirements.
260707 산업 자동화 사례 영문 테스트
Korea & Company's palletizing solution prioritizes increased production volume and reduced workforce.
MJ_TEST_260428
Process Overview
This automation solution uses two DENSO robots—VM60B1 (6-axis vertical articulated robot) and HS055 (SCARA robot)—to automate raw material loading, turning-center machining of plastic parts, and a downstream press-fit (crimping) operation. By integrating material loading, machining support, and press-fit handling into a single automated workflow, the system minimizes control points while improving overall productivity.
Components
| Robot | DENSO VM-60B1 Repeatability: ±0.07 mm IP rating: IP40 Standard cycle time: 0.95 sec DENSO HS-055A1 (SCARA) Horizontal reach: 550 mm Repeatability: ±0.02 mm IP rating: IP6 |
|---|---|
| Peripherals | Hyundai WIA turning center KIT 4500 (optional / separate) Pneumatic press Raw material loading unit CNC machined-part transfer unit Machining chip/swarf discharge conveyor Finished-product outfeed conveyor |
Workflow
| STEP 1. | Load plastic workpieces into the turning center |
|---|---|
| STEP 2. | Take out the machined/cut parts and place them onto the transfer unit |
| STEP 3. | Pick the parts with the SCARA robot and load them into the press station |
| STEP 4. | Pick the press-finished parts and discharge them to the outfeed conveyor |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.